diff --git a/drivers/sk98lin/h/skrlmt.h b/drivers/sk98lin/h/skrlmt.h
new file mode 100644
index 0000000..651bb3f
--- /dev/null
+++ b/drivers/sk98lin/h/skrlmt.h
@@ -0,0 +1,563 @@
+/******************************************************************************
+ *
+ * Name:	skrlmt.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.35 $
+ * Date:	$Date: 2003/01/31 14:12:41 $
+ * Purpose:	Header file for Redundant Link ManagemenT.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2001 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skrlmt.h,v $
+ *	Revision 1.35  2003/01/31 14:12:41  mkunz
+ *	single port adapter runs now with two identical MAC addresses
+ *	
+ *	Revision 1.34  2002/09/23 15:13:41  rwahl
+ *	Editorial changes.
+ *	
+ *	Revision 1.33  2001/07/03 12:16:48  mkunz
+ *	New Flag ChgBcPrio (Change priority of last broadcast received)
+ *	
+ *	Revision 1.32  2001/02/14 14:06:31  rassmann
+ *	Editorial changes.
+ *	
+ *	Revision 1.31  2001/02/05 14:25:26  rassmann
+ *	Prepared RLMT for transparent operation.
+ *	
+ *	Revision 1.30  2001/01/22 13:41:39  rassmann
+ *	Supporting two nets on dual-port adapters.
+ *	
+ *	Revision 1.29  2000/11/17 08:58:00  rassmann
+ *	Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event.
+ *	
+ *	Revision 1.28  2000/11/09 12:24:34  rassmann
+ *	Editorial changes.
+ *	
+ *	Revision 1.27  1999/11/22 13:59:56  cgoos
+ *	Changed license header to GPL.
+ *	
+ *	Revision 1.26  1999/10/04 14:01:19  rassmann
+ *	Corrected reaction to reception of BPDU frames (#10441).
+ *	
+ *	Revision 1.25  1999/07/20 12:53:39  rassmann
+ *	Fixed documentation errors for lookahead macros.
+ *	
+ *	Revision 1.24  1999/05/28 11:15:56  rassmann
+ *	Changed behaviour to reflect Design Spec v1.2.
+ *	Controlling Link LED(s).
+ *	Introduced RLMT Packet Version field in RLMT Packet.
+ *	Newstyle lookahead macros (checking meta-information before looking at
+ *	  the packet).
+ *	
+ *	Revision 1.23  1999/01/28 12:50:42  rassmann
+ *	Not using broadcast time stamps in CheckLinkState mode.
+ *	
+ *	Revision 1.22  1999/01/27 14:13:04  rassmann
+ *	Monitoring broadcast traffic.
+ *	Switching more reliably and not too early if switch is
+ *	 configured for spanning tree.
+ *	
+ *	Revision 1.21  1998/12/08 13:11:25  rassmann
+ *	Stopping SegTimer at RlmtStop.
+ *	
+ *	Revision 1.20  1998/11/24 12:37:33  rassmann
+ *	Implemented segmentation check.
+ *	
+ *	Revision 1.19  1998/11/17 13:43:06  rassmann
+ *	Handling (logical) tx failure.
+ *	Sending packet on logical address after PORT_SWITCH.
+ *	
+ *	Revision 1.18  1998/11/13 16:56:56  rassmann
+ *	Added macro version of SkRlmtLookaheadPacket.
+ *	
+ *	Revision 1.17  1998/11/06 18:06:05  rassmann
+ *	Corrected timing when RLMT checks fail.
+ *	Clearing tx counter earlier in periodical checks.
+ *	
+ *	Revision 1.16  1998/11/03 13:53:50  rassmann
+ *	RLMT should switch now (at least in mode 3).
+ *	
+ *	Revision 1.15  1998/10/22 11:39:52  rassmann
+ *	Corrected signed/unsigned mismatches.
+ *	Corrected receive list handling and address recognition.
+ *	
+ *	Revision 1.14  1998/10/15 15:16:36  rassmann
+ *	Finished Spanning Tree checking.
+ *	Checked with lint.
+ *	
+ *	Revision 1.13  1998/09/24 19:16:08  rassmann
+ *	Code cleanup.
+ *	Introduced Timer for PORT_DOWN due to no RX.
+ *	
+ *	Revision 1.12  1998/09/16 11:09:52  rassmann
+ *	Syntax corrections.
+ *	
+ *	Revision 1.11  1998/09/15 11:28:50  rassmann
+ *	Syntax corrections.
+ *	
+ *	Revision 1.10  1998/09/14 17:07:38  rassmann
+ *	Added code for port checking via LAN.
+ *	Changed Mbuf definition.
+ *	
+ *	Revision 1.9  1998/09/07 11:14:15  rassmann
+ *	Syntax corrections.
+ *	
+ *	Revision 1.8  1998/09/07 09:06:08  rassmann
+ *	Syntax corrections.
+ *	
+ *	Revision 1.7  1998/09/04 19:41:34  rassmann
+ *	Syntax corrections.
+ *	Started entering code for checking local links.
+ *	
+ *	Revision 1.6  1998/09/04 12:14:28  rassmann
+ *	Interface cleanup.
+ *	
+ *	Revision 1.5  1998/09/02 16:55:29  rassmann
+ *	Updated to reflect new DRV/HWAC/RLMT interface.
+ *	
+ *	Revision 1.4  1998/09/02 07:26:02  afischer
+ *	typedef for SK_RLMT_PORT
+ *
+ *	Revision 1.3  1998/08/27 14:29:03  rassmann
+ *	Code cleanup.
+ *	
+ *	Revision 1.2  1998/08/27 14:26:25  rassmann
+ *	Updated interface.
+ *	
+ *	Revision 1.1  1998/08/21 08:29:10  rassmann
+ *	First public version.
+ *	
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the header file for Redundant Link ManagemenT.
+ *
+ * Include File Hierarchy:
+ *
+ *	"skdrv1st.h"
+ *	...
+ *	"sktypes.h"
+ *	"skqueue.h"
+ *	"skaddr.h"
+ *	"skrlmt.h"
+ *	...
+ *	"skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKRLMT_H
+#define __INC_SKRLMT_H
+
+#ifdef __cplusplus
+#error C++ is not yet supported.
+extern "C" {
+#endif	/* cplusplus */
+
+/* defines ********************************************************************/
+
+#define	SK_RLMT_NET_DOWN_TEMP	1	/* NET_DOWN due to last port down. */
+#define	SK_RLMT_NET_DOWN_FINAL	2	/* NET_DOWN due to RLMT_STOP. */
+
+/* ----- Default queue sizes - must be multiples of 8 KB ----- */
+
+/* Less than 8 KB free in RX queue => pause frames. */
+#define SK_RLMT_STANDBY_QRXSIZE	128	/* Size of rx standby queue in KB. */
+#define SK_RLMT_STANDBY_QXASIZE	32	/* Size of async standby queue in KB. */
+#define SK_RLMT_STANDBY_QXSSIZE	0	/* Size of sync standby queue in KB. */
+
+#define SK_RLMT_MAX_TX_BUF_SIZE	60	/* Maximum RLMT transmit size. */
+
+/* ----- PORT states ----- */
+
+#define SK_RLMT_PS_INIT			0	/* Port state: Init. */
+#define SK_RLMT_PS_LINK_DOWN	1	/* Port state: Link down. */
+#define SK_RLMT_PS_DOWN			2	/* Port state: Port down. */
+#define SK_RLMT_PS_GOING_UP		3	/* Port state: Going up. */
+#define SK_RLMT_PS_UP			4	/* Port state: Up. */
+
+/* ----- RLMT states ----- */
+
+#define SK_RLMT_RS_INIT			0	/* RLMT state: Init. */
+#define SK_RLMT_RS_NET_DOWN		1	/* RLMT state: Net down. */
+#define SK_RLMT_RS_NET_UP		2	/* RLMT state: Net up. */
+
+/* ----- PORT events ----- */
+
+#define SK_RLMT_LINK_UP			1001	/* Link came up. */
+#define SK_RLMT_LINK_DOWN		1002	/* Link went down. */
+#define SK_RLMT_PORT_ADDR		1003	/* Port address changed. */
+
+/* ----- RLMT events ----- */
+
+#define SK_RLMT_START			2001	/* Start RLMT. */
+#define SK_RLMT_STOP			2002	/* Stop RLMT. */
+#define SK_RLMT_PACKET_RECEIVED	2003	/* Packet was received for RLMT. */
+#define SK_RLMT_STATS_CLEAR		2004	/* Clear statistics. */
+#define SK_RLMT_STATS_UPDATE	2005	/* Update statistics. */
+#define SK_RLMT_PREFPORT_CHANGE	2006	/* Change preferred port. */
+#define SK_RLMT_MODE_CHANGE		2007	/* New RlmtMode. */
+#define SK_RLMT_SET_NETS		2008	/* Number of Nets (1 or 2). */
+
+/* ----- RLMT mode bits ----- */
+
+/*
+ * CAUTION:	These defines are private to RLMT.
+ *			Please use the RLMT mode defines below.
+ */
+
+#define SK_RLMT_CHECK_LINK		  1		/* Check Link. */
+#define SK_RLMT_CHECK_LOC_LINK	  2		/* Check other link on same adapter. */
+#define SK_RLMT_CHECK_SEG		  4		/* Check segmentation. */
+
+#ifndef RLMT_CHECK_REMOTE
+#define SK_RLMT_CHECK_OTHERS	SK_RLMT_CHECK_LOC_LINK
+#else	/* RLMT_CHECK_REMOTE */
+#define SK_RLMT_CHECK_REM_LINK	  8		/* Check link(s) on other adapter(s). */
+#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED	3
+#define SK_RLMT_CHECK_OTHERS	\
+		(SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+#endif	/* RLMT_CHECK_REMOTE */
+
+#ifndef SK_RLMT_ENABLE_TRANSPARENT
+#define SK_RLMT_TRANSPARENT		  0		/* RLMT transparent - inactive. */
+#else	/* SK_RLMT_ENABLE_TRANSPARENT */
+#define SK_RLMT_TRANSPARENT		128		/* RLMT transparent. */
+#endif	/* SK_RLMT_ENABLE_TRANSPARENT */
+
+/* ----- RLMT modes ----- */
+
+/* Check Link State. */
+#define SK_RLMT_MODE_CLS	(SK_RLMT_CHECK_LINK)
+
+/* Check Local Ports: check other links on the same adapter. */
+#define SK_RLMT_MODE_CLP	(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK)
+
+/* Check Local Ports and Segmentation Status. */
+#define SK_RLMT_MODE_CLPSS	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG)
+
+#ifdef RLMT_CHECK_REMOTE
+/* Check Local and Remote Ports: check links (local or remote). */
+	Name of define TBD!
+#define SK_RLMT_MODE_CRP	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
+
+/* Check Local and Remote Ports and Segmentation Status. */
+	Name of define TBD!
+#define SK_RLMT_MODE_CRPSS	\
+		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \
+		SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG)
+#endif	/* RLMT_CHECK_REMOTE */
+
+/* ----- RLMT lookahead result bits ----- */
+
+#define SK_RLMT_RX_RLMT			1	/* Give packet to RLMT. */
+#define SK_RLMT_RX_PROTOCOL		2	/* Give packet to protocol. */
+
+/* Macros */
+
+#if 0
+SK_AC		*pAC		/* adapter context */
+SK_U32		PortNum		/* receiving port */
+unsigned	PktLen		/* received packet's length */
+SK_BOOL		IsBc		/* Flag: packet is broadcast */
+unsigned	*pOffset	/* offs. of bytes to present to SK_RLMT_LOOKAHEAD */
+unsigned	*pNumBytes	/* #Bytes to present to SK_RLMT_LOOKAHEAD */
+#endif	/* 0 */
+
+#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \
+	SK_AC	*_pAC; \
+	SK_U32	_PortNum; \
+	_pAC = (pAC); \
+	_PortNum = (SK_U32)(PortNum); \
+	/* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \
+	_pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \
+    if (_pAC->Rlmt.RlmtOff) { \
+		*(pNumBytes) = 0; \
+    } \
+    else {\
+        if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
+    		*(pNumBytes) = 0; \
+    	} \
+    	else if (IsBc) { \
+    		if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
+    			*(pNumBytes) = 6; \
+    			*(pOffset) = 6; \
+    		} \
+    		else { \
+    			*(pNumBytes) = 0; \
+    		} \
+    	} \
+    	else { \
+    		if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
+    			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+    			*(pNumBytes) = 0; \
+    		} \
+    		else { \
+    			*(pNumBytes) = 6; \
+    			*(pOffset) = 0; \
+    		} \
+    	} \
+    } \
+}
+
+#if 0
+SK_AC		*pAC		/* adapter context */
+SK_U32		PortNum		/* receiving port */
+SK_U8		*pLaPacket,	/* received packet's data (points to pOffset) */
+SK_BOOL		IsBc		/* Flag: packet is broadcast */
+SK_BOOL		IsMc		/* Flag: packet is multicast */
+unsigned	*pForRlmt	/* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */
+SK_RLMT_LOOKAHEAD() expects *pNumBytes from
+packet offset *pOffset (s.a.) at *pLaPacket.
+
+If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is
+BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler
+can trash unneeded parts of the if construction.
+#endif	/* 0 */
+
+#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \
+	SK_AC	*_pAC; \
+	SK_U32	_PortNum; \
+	SK_U8	*_pLaPacket; \
+	_pAC = (pAC); \
+	_PortNum = (SK_U32)(PortNum); \
+	_pLaPacket = (SK_U8 *)(pLaPacket); \
+	if (IsBc) {\
+		if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \
+			_PortNum].Net->NetNumber].CurrentMacAddress.a)) { \
+			_pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \
+			_pAC->Rlmt.CheckSwitch = SK_TRUE; \
+		} \
+		/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+		*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+	} \
+	else if (IsMc) { \
+		if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \
+			_pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \
+			if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \
+				*(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \
+			} \
+			else { \
+				*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+			} \
+		} \
+		else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \
+			*(pForRlmt) = SK_RLMT_RX_RLMT; \
+		} \
+		else { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+		} \
+	} \
+	else { \
+		if (SK_ADDR_EQUAL( \
+			_pLaPacket, \
+			_pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \
+			*(pForRlmt) = SK_RLMT_RX_RLMT; \
+		} \
+		else { \
+			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
+			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
+		} \
+	} \
+}
+
+#ifdef SK_RLMT_FAST_LOOKAHEAD
+Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif	/* SK_RLMT_FAST_LOOKAHEAD */
+#ifdef SK_RLMT_SLOW_LOOKAHEAD
+Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead.
+#endif	/* SK_RLMT_SLOW_LOOKAHEAD */
+
+/* typedefs *******************************************************************/
+
+#ifdef SK_RLMT_MBUF_PRIVATE
+typedef struct s_RlmtMbuf {
+	some content
+} SK_RLMT_MBUF;
+#endif	/* SK_RLMT_MBUF_PRIVATE */
+
+
+#ifdef SK_LA_INFO
+typedef struct s_Rlmt_PacketInfo {
+	unsigned	PacketLength;			/* Length of packet. */
+	unsigned	PacketType;				/* Directed/Multicast/Broadcast. */
+} SK_RLMT_PINFO;
+#endif	/* SK_LA_INFO */
+
+
+typedef struct s_RootId {
+	SK_U8		Id[8];					/* Root Bridge Id. */
+} SK_RLMT_ROOT_ID;
+
+
+typedef struct s_port {
+	SK_MAC_ADDR	CheckAddr;
+	SK_BOOL		SuspectTx;
+} SK_PORT_CHECK;
+
+
+typedef struct s_RlmtNet SK_RLMT_NET;
+
+
+typedef struct s_RlmtPort {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U8			PortState;				/* Current state of this port. */
+
+	/* For PNMI */
+	SK_BOOL			LinkDown;
+	SK_BOOL			PortDown;
+	SK_U8			Align01;
+
+	SK_U32			PortNumber;				/* Number of port on adapter. */
+	SK_RLMT_NET *	Net;					/* Net port belongs to. */
+
+	SK_U64			TxHelloCts;
+	SK_U64			RxHelloCts;
+	SK_U64			TxSpHelloReqCts;
+	SK_U64			RxSpHelloCts;
+
+/* ----- Private part ----- */
+
+/*	SK_U64			PacketsRx; */				/* Total packets received. */
+	SK_U32			PacketsPerTimeSlot;		/* Packets rxed between TOs. */
+/*	SK_U32			DataPacketsPerTimeSlot; */	/* Data packets ... */
+	SK_U32			BpduPacketsPerTimeSlot;	/* BPDU packets rxed in TS. */
+	SK_U64			BcTimeStamp;			/* Time of last BC receive. */
+	SK_U64			GuTimeStamp;			/* Time of entering GOING_UP. */
+
+	SK_TIMER		UpTimer;				/* Timer struct Link/Port up. */
+	SK_TIMER		DownRxTimer;			/* Timer struct down rx. */
+	SK_TIMER		DownTxTimer;			/* Timer struct down tx. */
+
+	SK_U32			CheckingState;			/* Checking State. */
+
+	SK_ADDR_PORT *	AddrPort;
+
+	SK_U8			Random[4];				/* Random value. */
+	unsigned		PortsChecked;			/* #ports checked. */
+	unsigned		PortsSuspect;			/* #ports checked that are s. */
+	SK_PORT_CHECK	PortCheck[1];
+/*	SK_PORT_CHECK	PortCheck[SK_MAX_MACS - 1]; */
+
+	SK_BOOL			PortStarted;			/* Port is started. */
+	SK_BOOL			PortNoRx;				/* NoRx for >= 1 time slot. */
+	SK_BOOL			RootIdSet;
+	SK_RLMT_ROOT_ID	Root;					/* Root Bridge Id. */
+} SK_RLMT_PORT;
+
+
+struct s_RlmtNet {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U32			NetNumber;			/* Number of net. */
+
+	SK_RLMT_PORT *	Port[SK_MAX_MACS];	/* Ports that belong to this net. */
+	SK_U32			NumPorts;			/* Number of ports. */
+	SK_U32			PrefPort;			/* Preferred port. */
+
+	/* For PNMI */
+
+	SK_U32			ChgBcPrio;			/* Change Priority of last broadcast received */
+	SK_U32			RlmtMode;			/* Check ... */
+	SK_U32			ActivePort;			/* Active port. */
+	SK_U32			Preference;		/* 0xFFFFFFFF: Automatic. */
+
+	SK_U8			RlmtState;			/* Current RLMT state. */
+
+/* ----- Private part ----- */
+	SK_BOOL			RootIdSet;
+	SK_U16			Align01;
+
+	int				LinksUp;			/* #Links up. */
+	int				PortsUp;			/* #Ports up. */
+	SK_U32			TimeoutValue;		/* RLMT timeout value. */
+
+	SK_U32			CheckingState;		/* Checking State. */
+	SK_RLMT_ROOT_ID	Root;				/* Root Bridge Id. */
+
+	SK_TIMER		LocTimer;			/* Timer struct. */
+	SK_TIMER		SegTimer;			/* Timer struct. */
+};
+
+
+typedef struct s_Rlmt {
+
+/* ----- Public part (read-only) ----- */
+
+	SK_U32			NumNets;			/* Number of nets. */
+	SK_U32			NetsStarted;		/* Number of nets started. */
+	SK_RLMT_NET		Net[SK_MAX_NETS];	/* Array of available nets. */
+	SK_RLMT_PORT	Port[SK_MAX_MACS];	/* Array of available ports. */
+
+/* ----- Private part ----- */
+	SK_BOOL			CheckSwitch;
+	SK_BOOL			RlmtOff;            /* set to zero if the Mac addresses 
+                                           are equal or the second one 
+                                           is zero */
+	SK_U16			Align01;
+
+} SK_RLMT;
+
+
+extern	SK_MAC_ADDR	BridgeMcAddr;
+extern	SK_MAC_ADDR	SkRlmtMcAddr;
+
+/* function prototypes ********************************************************/
+
+
+#ifndef SK_KR_PROTO
+
+/* Functions provided by SkRlmt */
+
+/* ANSI/C++ compliant function prototypes */
+
+extern	void	SkRlmtInit(
+	SK_AC	*pAC,
+	SK_IOC	IoC,
+	int		Level);
+
+extern	int	SkRlmtEvent(
+	SK_AC		*pAC,
+	SK_IOC		IoC,
+	SK_U32		Event,
+	SK_EVPARA	Para);
+
+#else	/* defined(SK_KR_PROTO) */
+
+/* Non-ANSI/C++ compliant function prototypes */
+
+#error KR-style function prototypes are not yet provided.
+
+#endif	/* defined(SK_KR_PROTO)) */
+
+
+#ifdef __cplusplus
+}
+#endif	/* __cplusplus */
+
+#endif	/* __INC_SKRLMT_H */